Sanjel Corp. Slashes Development Time with SolidWorks 3D CAD and Simulation Software

CONCORD, Mass. — (BUSINESS WIRE) — June 8, 2009 Establishing oil wells in the Middle East requires a large investment in time, equipment, and money. Petroleum-producing companies that hire service companies to get their wells going set a high performance standard, demanding zero error and consistent, high levels of success.

When one oil driller needed special equipment – a robust, redundant cementing skid – it turned to Sanjel Corporation, a specialized energy service company headquartered in Calgary, Alberta, Canada. Sanjel designed and manufactured a cementing skid utilizing Sanjel’s new SCM (Sanjel Cyclonic Mixer) cement mixing technology. Adapting an aggressive design stance and SolidWorks® 3D CAD software, Sanjel produced a working unit in six short months.

“Our designers and the fabrication team collaborated in real time around SolidWorks 3D models,” said Kris Sato, senior mechanical designer at Sanjel Corporation. “This helped us deliver quickly on an important product that could easily have taken two years to build. SolidWorks software gave everyone involved a clear picture of what we were working on and working toward. SolidWorks kept us moving fast.”

What exactly does the SCM Skid do?

The SCM skid provides cementing services for oil wells. This includes: performing primary cementing tasks, such as cementing the steel casing in the well; remedial cementing, like cement squeezes where a target zone in the oil well’s column is slated for production; or executing well kills to keep the pressure of the formation fluids from entering the well bore.

These jobs are sensitive and critical. An equipment failure can mean a delay in petroleum production or severe damage to the oil well, costing time and money.

Sanjel's SCM skid is a self-contained mobile unit that can be transported on a large winch truck from site to site over unpaved desert roads or on the back of a low-boy trailer on paved highway. In developing the custom cementing unit, Sanjel used SolidWorks Simulation software to ensure it is rugged enough to withstand being loaded up onto the back of a winch truck, being lifted onto a cargo ship by crane, sustaining impacts from vehicles and machinery, and enduring conditions commonly encountered in the oilfield.

Sanjel used SolidWorks Flow Simulation software to help ensure the cement slurry flows smoothly through the unit's piping, which consists of T's, elbows, valves, and other fittings. Any "dead zones" would allow settling of the slurry, creating a plug in the piping and affecting the operation of the unit.

Design engineers used SolidWorks eDrawings® email-enabled design communication software to help various people, from welders to executives, to see, understand, and evaluate the design of the cementing skid. The sheet metal package in SolidWorks allowed designers to provide welders with quick and accurate pipe templates for various copes found at piping joints within minutes. It would have taken them about an hour to generate each one by hand.

“We’d edit a design in real time, refresh the assembly, display the new piping run, and the guys would put it together,” said Sato. “We quickly arrived at the most logical, functional and fabrication-friendly piping run, and we did it fast. Methods like these, and the power of 3D design, let us do this in six months versus two years.”

SolidWorks also helped Sanjel collaborate with suppliers. "The SCM skid utilizes OEM components such as its engines,” he continued. “Having OEM vendors that also use SolidWorks allowed us to drop in their engine/transmission/radiator assembly into our skid layout. This saved us time and provided a more accurate layout that ensured that we could confidently design around OEM components without worrying about fit."

Sanjel relies on authorized SolidWorks reseller Automated Design Systems for ongoing software training, implementation, and support.

About Dassault Systèmes SolidWorks Corp.

Dassault Systèmes SolidWorks Corp., a Dassault Systèmes S.A. subsidiary, is a world leader in 3D solutions. The company develops and markets software for design, analysis, product data management, and documentation. It is the leading supplier of 3D CAD technology, giving teams intuitive, high-performing software that helps them design better products. For the latest news, information, or an online demonstration, visit the company’s Web site ( or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).

CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks, eDrawings, and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other brand and product names are trademarks of their respective owners. Copyright © 2009 Dassault Systèmes SolidWorks Corp.


Dassault Systèmes SolidWorks Corp. Press Contacts:
Dassault Systèmes SolidWorks Corp.
Nancy Buchino, 978-318-5262
Email Contact
Beaupre & Co. Public Relations
Darby Johnson, 603-559-5809
Email Contact

Review Article Be the first to review this article

Featured Video
BIM Modeler for Woolpert at Oakbrook Terrace, Illinois
Upcoming Events
InterDrone 2020 at Hyatt Regency Dallas TX - Dec 15 - 17, 2020
Milipol Asia-Pacific 2021 at Singapore - Mar 23 - 25, 2021
University of Denver GIS Masters Degree Online

© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise