Texas Instruments delivers up to 30 percent higher performance for data-intensive applications with new 1.2 GHz C64x+ DSP

Memory, cache and process node enhancements provide a cost-efficient performance boost for system savings and greater design flexibility

HOUSTON, March 11 /PRNewswire/ -- Developers of data-intensive signal processing applications will benefit from the increased performance and value provided by the new TMS320C6457 digital signal processor (DSP), available at speeds of 1.2 GHz and 1 GHz from Texas Instruments Incorporated (TI) (NYSE: TXN). The C6457 delivers up to 30 percent more performance at one-third less the cost of current single core DSP processors from TI. This performance lift is due to several memory and cache enhancements, while the cost reduction is achieved through a smaller process node. These improvements provide system savings, greater efficiency and increased design flexibility for networking, military, imaging and industrial markets, in applications such as medical imaging, radar, industrial vision systems and test equipment ( www.ti.com/c6457).

C6457 key features and benefits

    --  Based on TI's industry-leading 1.2 GHz TMS320C64x+(TM) DSP core, the
        C6457 delivers 9,600 (16-bit) MMACS of peak performance for a cycle for
        cycle performance improvement of up to 30 percent.
    --  Performance improvements enabled by 2 MB of on-chip L2 memory (up to 1
        MB cacheable), faster 32-bit DDR2 EMIF (667 MHz) and memory, cache and
        bus architecture enhancements. This gives customers the flexibility to
        add more channels to their designs as well as increased headroom for
        additional application features.
    --  High-speed interconnect available with Serial RapidIO (SRIO) and Gigabit
        Ethernet MAC serializer/deserializer (SERDES) interfaces for efficient
        inter-processor communications.
    --  On-chip acceleration for telecommunications applications with two
        Turbo-Decoder Coprocessors (TCP2) and one Viterbi Coprocessor (VCP2). 
        This increases channel decoding operations to offload the DSP core,
        allowing more channels on a single processor for system cost savings.
    --  Backwards code compatible with other high performance C64x DSPs to
        enable legacy code reuse for a significantly shorter development cycle
        and increased design flexibility.

Pricing, availability, tools and support

TMX320C6457 samples are available today from TI and TI authorized distributors in a 23 x 23 mm BGA package. Pricing for the 1.2 GHz version is $146 USD and the 1 GHz version is $112 USD (both in 1K unit volume).

Developers can get started with the C6457 Evaluation Module (EVM). This easy-to-use development tool includes two on-board C6457 processors, high-speed DSP interconnect with Gigabit Ethernet MAC and Serial RapidIO SERDES interfaces, embedded JTAG emulation with an XDS560T trace pod header and a board-specific Code Composer Studio(TM) Integrated Development Environment. It also includes several TI analog power management devices and a clock driver to improve system performance. Order entry is open for the TMDXEVM6457 at $1995 USD ( www.ti.com/c6457evm).

Find out more about the C6457 digital signal processor or TI's high performance portfolio of products by visiting the links below:

    --  TMS320C6457 general information: www.ti.com/c6457
    --  TMS320C6457 product folder: www.ti.com/c6457pf
    --  TMS320C6457 EVM: www.ti.com/c6457evm
    --  DSP selection tool: www.ti.com/dsptool
    --  Learn more about TI's high performance processors, including the C6457
        and how to achieve faster performance with Serial RapidIO, at the TI
        Technology Day San Jose, April 1 - 2.  Register now at
www.ti.com/techdays2009     --  System block diagrams featuring the C6457: High-Speed Data Acquisition
        Front End and Ultrasound System
    --  Complementary Analog power solutions: www.ti.com/processorpower
    --  TI's embedded processors: www.ti.com/processorspr
    --  TI E2E Community and support: http://community.ti.com/forums
    --  Follow TI on Twitter: www.twitter.com/txinstruments

Texas Instruments (NYSE: TXN) helps customers solve problems and develop new electronics that make the world smarter, healthier, safer, greener and more fun. A global semiconductor company, TI innovates through design, sales and manufacturing operations in more than 30 countries. For more information, go to www.ti.com.


TMS320C64x+ and Code Composer Studio are trademarks of Texas Instruments. All other trademarks and registered trademarks are the property of their respective owners.

Web site: http://www.ti.com/

Review Article Be the first to review this article

Featured Video
Senior ArcGIS® Developer for TerraGo Technologies at Sterling, Virginia
GIS Analyst for Union County NC at Monroe, California
GIS Analyst for Town of Little Elm at Little Elm, Texas
GIS Spec I /Meteorological for University of Nebraska at lincoln, Nebraska
Sr Marketing Specialist for CBRE at Los Angeles, California
Geoscientist for University of Nebraska at lincoln, Nebraska
Upcoming Events
GEO Business at ExCel London United Kingdom - May 19 - 20, 2021
FOSSGIS-Konferenz 2021 at OST - Ostschweizer Fachhochschule Campus Rapperswil Oberseestrasse 10 Rapperswil Switzerland - Jun 6 - 9, 2021
GI_Forum 2021 | re.connecting spatially at Salzburg Austria - Jul 5 - 9, 2021
University of Denver GIS Masters Degree Online

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise