Lead’Air Inc has successfully introduced several cutting-edge new TRACK’AIR ™ 2019 products during INTERGEO 2018 in Frankfurt Germany.

November 12, 2018 -- Lead’Air, Inc located in Kissimmee, Florida, USA is pleased to report that our 2019 products were met with great interest by the many international attendees visiting the INTERGEO this year. The versatility of our new imaging and LiDAR systems is what particularly attracted the aerial survey professionals. As one visitor put it “we do not need more single-purpose aerial survey equipment; new aerial sensors should be capable of handling more than one type of job.” This correctly describes the new MIDAS oblique camera systems which can be configured at will to generate 5 cm (2 inches) GSD from 1,000 to 10,000 feet AGL, can be moved from a fixed-wing aircraft to a helicopter and back in a couple of hours, and can be enhanced with a powerful state of the art LiDAR, when required.

The 2019 MIDAS will be delivered with 4, 8, or up to 16 oblique cameras with an optional Riegl LiDAR which can be easily installed or removed depending on the project. It has an option of one or two vertical cameras (RGB or NIR+RGB). Several camera configurations are available; survey adapted SLR (Nikon or Canon) and Phase One. However, the Phase One iXM version undoubtedly will be our 2019 flagship. The operations of oblique cameras will be transformed with the release of the MIDAS iXM version. Capable of flying three times faster and three times lower than our previous systems, the iXMIDAS will significantly increase the scope of the traditional MIDAS systems. It will allow the collection of large-scale imagery down to 1 cm GSD and collection speed in excess of 200, even 300 knots (depending on the GSD). Fitted with the latest smart TRACK'AIR Flight Management System, the MIDAS 2019 will not require an operator on board the aircraft.

Several specialized versions of the MIDAS will also become available;
1) The MIDAR, a MIDAS vertical/oblique camera system with a Riegl LiDAR. The LiDAR module is only installed when necessary and can be easily transferred by the user to other aircraft to capture separate projects. Our customers tell us they do not need to refly the LiDAR as often as the imagery; the LiDAR unit can be shared between several MIDAR units or used on its own.
2) The MIDARoad, a MIDAR specifically designed for high speed/ high-resolution 1cm GSD road inventory from fixed-wing aircraft at 120 knots.
3) The MIDASMetro, a 17 camera MIDAS specially designed for high-resolution and highly detailed 1 inch GSD 3D city mapping.

Also, the Lead’Air DSS (LADSS), a turnkey replacement for the recently discontinued Applanix DSS mapping camera, will be introduced at the ILMF in January 2019. The LADSS will include the all-new state of the art 150-megapixel Phase One iXM-RS150F, an extreme stabilization mount (+/- 30 degrees drift, +/- 60 degrees pitch and roll compensation), and Applanix real-time RapidOrtho™ processing, so that accurate orthophoto maps are ready to deliver upon landing. The LADSS can be used as a nadir mapping camera or in up to 45 degrees oblique mode with 360-degree targeting ability.

Last but not least, in 2019 Lead’Air will launch a survey twin based on the Piper Seneca 5 modified with Lead’Air's own FAA-approved 64 cm (25-inch) camera hole STC. Piper still produces the Seneca V, so they can be found in pristine conditions (as opposed to the average 1970s survey aircraft which spend more time grounded than in the air…). This outstanding airplane will offer 4.5+ hour’s endurance at 175 knots with a crew of two and a 250-pound survey camera on board while burning only 26 Gallons AVGAS per hour.

About Lead’Air, Inc
Lead'Air Inc., a USA Corporation, based at 113 S. Hoagland Blvd in Kissimmee, Florida, provides professional oblique Aerial Survey Camera Systems to capture metric quality imagery for 3D modeling of cities and disaster relief areas. Our MIDAS (Multi-Image Digital Acquisition System) is the most recognized and utilized system in the world with over 100 systems capturing millions of images every year. These systems and the MIDAS name itself have become synonymous with quality 3D modeling. Our extensive line of products incorporating from one to ten cameras and more, along with LiDAR, flight management systems, fully stabilized mounts and precision Applanix Inertial Navigation Systems makes Lead’Air the Premier Oblique Aerial Camera Survey System Company in the world. Find out more at www.trackair.com.

About Phase One Industrial
Phase One Industrial is a division of Phase One A/S that researches, develops, and manufactures specialized industrial camera systems and imaging software solutions. The division focuses on specific applications such as aerial mapping and surveying, ground and aerial inspection, agriculture, machine vision, and homeland security. https://industrial.Phase One.com/




Review Article Be the first to review this article


Featured Video
Jobs
GIS Analyst for City of Shreveport at Shreveport, Louisiana
GIS Analyst for Iberdrola at Augusta, Maine
Product Design Engineer - Testing Methods for Apple Inc at Cupertino, California
BIM Designer – Revit for Schneider Electric at Smyrna, Tennessee
BIM Modeler for Woolpert at Oakbrook Terrace, Illinois
Upcoming Events
InterDrone 2020 at Hyatt Regency Dallas TX - Dec 15 - 17, 2020
Milipol Asia-Pacific 2021 at Singapore - Mar 23 - 25, 2021
University of Denver GIS Masters Degree Online



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise