Magwel Announces Addition of Innovative Dynamic CDM Simulation to Their ESD Verification Suite

SAN JOSE, Calif. — (BUSINESS WIRE) — October 29, 2018 — Magwel®, a leading provider of ESD protection network verification software, announces its Charged Device Model (CDM) ESD simulation tool. Magwel’s CDM software uses its innovative FastCDM™ Engine to predict CDM discharge events using dynamic simulation. CDM has become an increasingly important issue for IC designers, especially for advanced process nodes due to larger packages, more sensitive devices and narrower wires. Chips with CDM problems can fail during handling or in the field, leading to costly recalls and low yield. Magwel’s CDM helps avert CDM issues during chip design and sign-off, well before production. Catching potential CDM issues early is an important way of improving final chip quality.

CDM discharges occur after electric charge builds up on the package and large metal structures on the die. Once a ground path is created it can be difficult to predict where the current will flow. Current can flow through almost any path in the chip, and potentially reach and damage many devices. Magwel’s CDM uses solver based extraction to create a highly accurate model of the large nets in a design. On-chip or off-chip inductances and capacitances, including decoupling and blocking capacitances, are added. Complex current flows of stored charge though triggered devices are calculated.

Magwel’s CDM reports over-voltage, over-current, EM violations and voltages on wires and voltages across devices.

Dynamic simulation with support for snap back models and multiple parallel discharge paths reduces the number of false errors, making error diagnosis more efficient. These capabilities have already been field proven with Magwel’s existing HBM simulation tool, ESDi®. Cross power domain checks are also performed.

Dynamic simulation is the most accurate method of understanding voltage overstress on protected devices in the IO ring and core. Magwel’s FastCDM engine offers high performance and accurate transient results. Traditional simulation methods are too slow for larger advanced node SOCs and have difficulty with TLP models typically used to model ESD devices.

“Magwel’s CDM tool is designed for experienced ESD engineers and is also suitable for use by design engineers,” says Dündar Dumlugöl, Magwel CEO. “We have spent a lot of time looking at the CDM problem and have built a solution that can be deployed easily to ensure tape-out success and improve yield.”

Magwel offers 3D field solver based analysis and design solutions for digital, analog/mixed-signal, power management, automotive, and RF semiconductors. Magwel software products address power device design with Rdson extraction and electro-migration analysis, ESD protection network simulation/analysis, latch-up analysis and power distribution network integrity with EMIR and thermal analysis. Leading semiconductor vendors use Magwel’s tools to improve productivity, avoid redesign, re-spins and field failures. www.magwel.com.

©2018 Magwel NV. All rights reserved Magwel, PTM, PTM-TR, PTM-ET, ESDi, FastCDM, Fast3D and the Magwel logo are trademarks of Magwel NV.



Contact:

Magwel
Tom Simon
Email Contact




Review Article Be the first to review this article


Featured Video
Jobs
GIS Analyst 1 for CBRE at Glendale, California
GIS Analyst for City of Carrollton at Carrollton, Texas
GIS Spec I /Meteorological for University of Nebraska at lincoln, Nebraska
GIS Analyst for Town of Little Elm at Little Elm, Texas
Sr Marketing Specialist for CBRE at Los Angeles, California
Senior ArcGIS® Developer for TerraGo Technologies at Sterling, Virginia
Upcoming Events
GEO Business at ExCel London United Kingdom - May 19 - 20, 2021
FOSSGIS-Konferenz 2021 at OST - Ostschweizer Fachhochschule Campus Rapperswil Oberseestrasse 10 Rapperswil Switzerland - Jun 6 - 9, 2021
GI_Forum 2021 | re.connecting spatially at Salzburg Austria - Jul 5 - 9, 2021
InterDrone 2021 at Hyatt Regency Dallas TX - Aug 10 - 12, 2021
University of Denver GIS Masters Degree Online



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise