Webinar Series Showcases New Technologies in V14 NI AWR Design Environment Software





EL SEGUNDO, Calif. – Oct. 3, 2018 – New technologies introduced in the V14 release of the NI AWR Design Environment platform will be showcased in a three-part webinar series presented by NI AWR software E-Learning director and electromagnetic (EM) technologist Dr. John Dunn. The V14 release focuses on all stages of RF/microwave design with an emphasis on accelerating design starts through three powerful design-assist modules: the printed circuit board (PCB) import wizard for an enhanced PCB/module EM verification flow, the network synthesis wizard for impedance-matching and the phased-array generator wizard for multiple-in-multiple-out (MIMO)/beam-steering antenna systems being employed in 5G communications and advanced drive-assist system (ADAS)-enabled vehicles.

To support ever-increasing functionality, PCBs are utilizing more complex board structures operating at high-frequencies. In the first webinar, Dr. Dunn will examine changing EM verification requirements for PCBs targeting RF/wireless applications and recent capabilities in the PCB import wizard that enable designers to isolate and characterize critical traces through complex multi-layer configurations.

The complete webinar series includes:

  • October 11 – RF PCB Design Verification and Flows
  • November 28 – Using Network Synthesis to Accelerate Matching Circuit Design
  • December 12 – Phased-Array 5G Antenna Design

All webinars in this series begin at 9 a.m. PT. Advance registration is required. For more information about the NI AWR Software V14 New Technologies Webinar Series and to register, visit awrcorp.com/news/events/event/webinar-rf-pcb-design-verification-and-flows.

About NI AWR Software

The NI AWR Design Environment software platform includes RF/microwave electronic design automation (EDA) tools such as Visual System Simulator™ system design software, Microwave Office/Analog Office microwave/RF circuit design software and AXIEM and Analyst™ EM analysis software. The NI AWR software product portfolio also includes AntSyn™ antenna design and synthesis software and AWR Connected™ third-party solutions.  Collectively, these products empower design engineers to dramatically reduce development time and cost for components, circuits, systems and subsystems employed in wireless, high-speed wired, broadband, aerospace and defense and electro-optical applications. More information is available at ni.com/awr.

About National Instruments

Since 1976, NI has made it possible for engineers and scientists to solve the world’s greatest engineering challenges with powerful, flexible technology solutions that accelerate productivity and drive rapid innovation. Customers from a wide variety of industries–from healthcare to automotive and from consumer electronics to particle physics–use NI’s integrated hardware and software platform to improve the world we live in.

# # #


Analog Office, AWR, AWR Design Environment, AXIEM, Microwave Office, National Instruments, NI and ni.com are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.


Sherry Hess
Vice President of Marketing, AWR Group, NI
(310) 726-3000
Email Contact


Review Article Be the first to review this article
Featured Video
Transit GIS analyst/planner for Jarrett Walker and Associates at Portland, Oregon
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
Senior Highway Engineer for RS&H at Jacksonville, Florida
Upcoming Events
URISA GIS Leadership Academy at Online Event IL - Dec 6 - 10, 2021
21st International Scientific GeoConference SGEM Vienna Green 2021 at Schonbrunn Palace Vienna Austria - Dec 7 - 11, 2021
ADW Hybrid 2021 at Amsterdam Netherlands - Jan 18 - 20, 2022
Amsterdam Drone Week: ADW Hybrid, at Amsterdam Netherlands - Jan 18 - 20, 2022

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise