Mentor Graphics Achieves ISO 26262 Certification for Questa Product Line Tool Qualification Report

Mentor Safe Functional Safety Assurance Program Continues Expansion with SGS-TÜV Saar Certification

WILSONVILLE, Ore., March 13, 2017 — (PRNewswire) —  Mentor Graphics Corporation (NASDAQ: MENT) announces that independent compliance firm SGS-TÜV Saar has certified the ISO 26262 compliance of Mentor's Software Tool Qualification Report for its Questa® Simulation, Verification Management and Clock-Domain Crossing (CDC) products.

With this certification, these Questa solutions are the latest additions to the Mentor Safe program, which is one of the industry's broadest and most comprehensive ISO 26262 qualification initiatives. Mentor Safe enables customers to integrate Mentor tools and software into their safety-critical design and verification flows at all criticality levels from ASIL A to ASIL D. Mentor Tool Qualification Kits provide all information necessary to properly evaluate use cases and confidence levels, reducing qualification efforts for OEMs and automotive semiconductor suppliers.

"Securing ISO 26262 certification for our Questa Tool Qualification Report further reinforces Mentor's commitment to helping our customers meet and exceed the automotive industry's rigorous safety requirements," said Brian Derrick, vice president and general manager at Mentor Graphics. "With this milestone, the Mentor Safe functional safety program continues its rapid expansion across our world-class portfolio of design automation technologies."

SGS-TÜV Saar certified the Software Tool Qualification Report for the three Questa products. The report provides assumed use cases and evidence that the software tool is suitable to be used for any tool confidence level (TCL) activity or task required by ISO 26262. Questa Simulation provides high performance, high capacity simulation for comprehensive advanced verification capable of reducing risk of validating complex automotive designs. Questa Verification Management analyzes coverage and verification data, providing complete insight necessary for the coverage and metric driven flows required to satisfy ISO 26262. Questa CDC provides industry-leading clock domain crossing analysis for complex automotive SOC's, verifying synchronization and metastability effects that cannot be dealt with by simulation-based verification techniques.

"Today's safety-critical automotive products require development and tool flows which are proven safe in accordance with ISO 26262," said Gudrun Neumann, software & automation team leader for SGS-TÜV Saar. "SGS-TÜV Saar certification gives OEMs and suppliers confidence that qualification reports for software tools used in the development of safety-critical products have been properly assessed in accordance with ISO 26262, reducing the costly efforts needed for tool qualification."

Mentor is a long-established automotive systems supplier, engaged with nearly every leading OEM and Tier 1 supplier, and providing design tools and embedded software in the areas of connectivity, electrification, autonomous drive and vehicle architecture. The company also offers a broad portfolio of ISO 26262-compliant tools for the design and creation of automotive-grade ICs. Mentor's distinguished track record in supplying automotive-grade electrical and electronic systems spans nearly 30 years.  

Mentor Safe products will ship with comprehensive enablement collateral providing descriptions and best practices information in the use of program-qualified products. More information on the Mentor Safe program and certified Mentor Graphics products and solutions is available at http://go.mentor.com/mentorsafe.

About Mentor Graphics
Mentor Graphics Corporation is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in the last fiscal year of approximately $1.28 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, Mentor and Questa are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owner.)

For more information:
Jack Taylor
(512) 560-7143
Email Contact

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/mentor-graphics-achieves-iso-26262-certification-for-questa-product-line-tool-qualification-report-300422187.html

SOURCE Mentor Graphics

Contact:
Mentor Graphics
Web: http://www.mentor.com




Review Article Be the first to review this article


Featured Video
Jobs
Design Engineer (Engineer 1/2) for Los Alamos National Laboratory at Los Alamos,, New Mexico
Structural Engineer 2 (Engineer 2) for Los Alamos National Laboratory at Los Alamos,, New Mexico
Structural Engineer for Kiewit at Lenexa, Kansas
Mechanical Engineer for Flextronics at Milpitas, California
Failure Analysis Engineer for Flextronics at Milpitas, California
3D Designer and Developer for Los Alamos National Laboratory at Los Alamos,, New Mexico
Upcoming Events
ACM SIGSPATIAL 2020 at Seattle WA - Nov 3 - 6, 2020
Health GIS: STAR (Spatial Thinking in Applied Research) at Online event Calgary Alberta Canada - Nov 18, 2020
Landslides & Geohazards at CO - Nov 20, 2020
University of Denver GIS Masters Degree Online



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise