Call for Papers ASP-DAC 2017

22nd Asia and South Pacific Design Automation Conference, Jan. 16-19, 2017

Chiba/Tokyo(Makuhari Messe Convention), Japan 

Aims of the Conference:

ASP-DAC 2017 is the 22nd annual international conference on VLSI design automation in Asia and South Pacific regions, one of the most active regions of design and fabrication of silicon chips in the world. The conference aims at providing the Asian and South Pacific CAD/DA and Design community with opportunities of presenting recent advances and with forums for future directions in technologies related to Electronic Design Automation (EDA). The format of the meeting intends to cultivate and promote an instructive and productive interchange of ideas among EDA researchers/developers and system/circuit/device designers. All scientists, engineers, and students who are interested in theoretical and practical aspects of VLSI design and design automation are welcomed to ASP-DAC.

Areas of Interest:

Original papers in, but not limited to, the following areas are invited.

1. System-Level Modeling and Design Methodology:

1.1. HW/SW co-design, co-simulation and co-verification

1.2. System-level design exploration, synthesis and optimization 

1.3. Model- and component-based embedded system/software design 

1.4. System-level formal verification 

1.5. System-level modeling, simulation and validation tools/methodology

2. Embedded System Architectures and Design:

2.1. Many- and multi-core SoC architecture 

2.2. Reconfigurable and self-adaptive SoC architecture 

2.3. IP/platform-based SoC design 

2.4. Domain-specific architecture 

2.5. Dependable architecture 

2.6. On-chip memory architecture 

2.7. Cyber physical system 

2.8. Storage system architecture 

2.9. Internet of things

3. On-chip Communication and Networks-on-Chip:

3.1. On-chip communication networks

3.2. Networks-on-chips

3.3. Interface and I/O design

3.4. Optical and RF on-chip communications

4. Embedded Software:

4.1. Kernel, middleware and virtual machine 

4.2. Compiler and toolchain 

4.3. Real-time system 

4.4. Resource allocation for heterogeneous computing platform 

4.5. Storage software and application 

4.6. Human-computer interface 

4.7. System verification and analysis

5. Device/Circuit-Level Modeling, Simulation and Verification:

5.1. Device/circuit/interconnect modeling and analysis 

5.2. Device/circuit-level simulation tools and methodologies 

5.3. RTL and gate-leveling modeling, simulation and verification 

5.4. Circuit-level formal verification

6. Analog, RF and Mixed Signal:

6.1. Analog/mixed-signal/RF synthesis

6.2. Analog layout, verification and simulation techniques 

6.3. Noise analysis 

6.4. High-frequency electromagnetic simulation of circuit 

6.5. Mixed-signal design consideration 

6.6. Power-aware analog circuit/system design 

6.7. Analog/mixed-signal modeling and simulation techniques 

6.8. CAD for memory circuits

7. Cross-layer Power Analysis, Low Power Design, and Thermal

Management:

7.1. Power modeling, analysis and simulation 

7.2. Low-power design and methodology 

7.3. Thermal aware design 

7.4. Architectural low-power design technique 

7.5. Energy harvesting and battery management

8. Logic/Behavioral/High-Level Synthesis and Optimization:

8.1. High-level synthesis tool and methodology 

8.2. Combinational, sequential and asynchronous logic synthesis 

8.3. Logic synthesis and physical design technique for FPGA 

8.4. Technology mapping 9. Physical Design:

9.1. Floorplanning, partitioning and placement 

9.2. Interconnect planning and synthesis 

9.3. Placement and routing optimization 

9.4. Clock network synthesis 

9.5. Post layout and post-silicon optimization 

9.6. Package/PCB/3D-IC routing

10. Design for Manufacturability and Reliability:

10.1. Reticle enhancement, lithography-related design and optimization

10.2.Resilience under manufacturing variation 

10.3.Design for manufacturability, yield, and defect tolerance 

10.4.Reliability, aging and soft error analysis 

10.5.Design for reliability, aging, and robustness

11. Timing and Signal/Power Integrity:

11.1.Deterministic/statistical timing and performance analysis and optimization

11.2.Power/ground and package modeling, analysis and optimization 

11.3.Signal/power integrity, EM modeling and analysis 

11.4.Extraction, TSV and package modeling 

11.5.2D/3D on-chip power delivery network analysis and optimization

12. Test and Design for Testability:

12.1.ATPG, BIST and DFT

12.2.Fault modeling and simulation

12.3.System test and 3D IC test

12.4.Online test and fault tolerance

12.5.Memory test and repair

12.6.Analog and mixed-signal test

13. Security and Fault-Tolerant System:

13.1. Security modeling and analysis

13.2.Architectures, tools and methodologies for secure hardware 

13.3.Design for security and security primitives 

13.4.Cross-layer security 

13.5.Fault analysis, detect and tolerance

14. Emerging Technology:

14.1.New transistor/device and process technology: spintronic, phase-change, single-electron etc.

14.2.CAD for nanotechnology, MEMS, 3D IC, quantum computing etc.

15. Emerging Application:

15.1.Biomedical application

15.2.Big data application

15.3.Advanced multimedia application

15.4.Energy-storage/smart-grid/smart-building design and optimization

15.5.Datacenter optimization

15.6.Automotive system design and optimization 

15.7.Electromobility

It is mandatory that at least one co-author per accepted paper registers the conference at the speaker’s registration rate and attends the conference to present the work. ACM, IEEE, IEICE and IPSJ reserve the right to exclude a paper from distribution after the conference (e.g., removal from ACM Digital Library and IEEE

Xplore) if the paper is not presented at the conference by the author of the paper. ASP-DAC does not allow double and/or parallel submissions of similar work to any other conferences, symposia, and journals.

Submission of Papers:

Deadline for submission: 5 PM AOE (Anywhere on earth) July 8 (Fri),2016

Notification of acceptance: Sep. 12 (Mon), 2016, Deadline for final version: 5 PMAOE (Anywhere on earth) Nov. 7 (Mon), 2016

Specification of the paper submission format will be available at the WEB site: http://www.aspdac.com/aspdac2017/

Panels, Special Sessions and Tutorials:

Suggestions and proposals are welcome and have to be addressed to the Conference Secretariat
(e-mail: aspdac2017-sec [at]  mls.aspdac.com) no later than July 8 (Fri), 2016.

Prospective Sponsors:

ACM SIGDA, IEEE CASS, IEEE CEDA, IEICE ESS, IPSJ SIGSLDM

ASP-DAC2017 Chairs:

General Chair: Naofumi Takagi (Kyoto University, Japan)

Technical Program Chair: David Z. Pan (University of Texas at Austin, USA)

Technical Program Vice Chairs: Atsushi Takahashi (Tokyo Institute of Technology, Japan), Tohru Ishihara (Kyoto University, Japan)

1 | 2  Next Page »



Review Article Be the first to review this article
Featured Video
Latest Blog Posts
The Open Geospatial Consortium BlogThe OGC Blog
by The Open Geospatial Consortium Blog
OGC seeks public comment on draft Simple Features 2021 standard
Jobs
GIS Coordinator for City of Marysville at Marysville, Ohio
GIS Analyst II for Foresters Co Op at Grass Valley, California
Geospatial Solutions Specialist for University of North Dakota at Grand Forks, North Dakota
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Senior Highway Engineer for RS&H at Jacksonville, Florida
Mechanical Engineer II for Aehr Test Systems at Fremont, California
Upcoming Events
InterDrone 2021 --- Cancelled at Hyatt Regency Dallas TX - Aug 10 - 12, 2021
URISA GIS Leadership Academy at 701 Lee St #960 Des Plaines IL - Aug 16 - 20, 2021
8th International Scientific Conference on SOCIAL SCIENCES (ISCSS) 2021 at Congress Centre MARITIM PARADISE BLUE Albena Bulgaria - Aug 21 - 30, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise