Nikon Insight L100, The Ultimate CMM Laser Scanner Combining Productivity and Accuracy

May 4, 2015 - Brighton, MI - Nikon Metrology introduces its latest CMM laser scanner, the Nikon InSight L100. Since 20 years, Nikon Metrology pioneered laser scanning and gradually sharpened the capabilities of this non-contact measuring technology. Nikon’s superior optics combined with innovative camera technology resulted in this new, ground breaking Nikon scanner. The InSight L100 CMM laser scanner offers the best possible combination of speed, accuracy and ease-of-use. Suited for both surface and feature measurement, even on shiny or multi-material parts, the Insight L100 quickly delivers accurate data and insightful part-to-CAD comparison reports.

Focus on Inspection Productivity

The InSight L100 is ideal to inspect larger components where productivity is key but without having to compromise on accuracy. The 100 mm wide Field-of-View combined with the data acquisition speed of 200,000 points/second results in a measurement productivity that wasn’t achievable with CMM scanning before.

To facilitate manual scan path programming, the InSight L100 features a brand new full Field-of-View (FOV) projector . By making sure that the scan line falls within the projected FOV, the user can be sure that he gets good part coverage. 

Capture the Finest Details

The InSight L100 is equipped with a high quality glass Nikon lens optimized for laser scanning. Combined with the high definition camera this results in a point resolution of only 42 μm enabling fine detail capture and measurement of sharper edges. The InSight L100 has an exceptionally small probing error of 6,5 μm -which is a measure of the scanner’s noise level- resulting in smooth meshes with high levels of detail.

The InSight L100 is perfectly suited for combined surface and feature measurement. Thanks to the low noise level and high point resolution, feature measurement accuracy approaches the accuracy of a touch probe.

Cope with Changes in Surface Color

A greater range and mix of surface materials, finishes, colors and transitions can be measured more efficiently without user interaction, manual tuning and part spraying. Nikon Metrology’s unique fourth-generation Enhanced Scanner Performance (ESP4) technology adapts the laser intensity for each point in the scan line to varying colors or materials faster than ever. This makes the scanner even more robust for digitizing multi-material assemblies or shiny surfaces without the need for cumbersome surface treatment. 

Extend the Measurement Reach

The patent-pending integrated mount rotation allows the scanner to rotate around  its autojoint axis in 30° increments up to 90°. This saves the use  of autojoint adaptors and is particularly interesting to measure turbine blades or parts with vertically oriented features and edges. The InSight L100 also allows the use of an extended 105° PH10 A-angle allowing better access to measure underneath or behind parts.

Better Insights, Earlier

By utilizing laser scanning, manufacturers can gain full insight of the dimensional quality of their products without compromising on cycle times. As the entire part is checked to CAD model, any areas of concern are immediately highlighted using color mapping. Further investigation and analysis is possible using fly-outs, sections and a library of Geometric Dimensioning and Tolerancing (GD&T). As a picture is worth a thousand numbers, these easy-to-interpret graphical reports facilitate exchange of results with internal or external colleagues or suppliers. This ultimately leads to easier decision-making, faster corrective actions and shorter time-to-market.

Multi-sensor applications, ready to retrofit to your CMM

The InSight L100 scanner can be combined with tactile probes and change rack to create a versatile fully automated multi-sensor CMM. Depending on the application both technologies can be used independently or together within the same inspection program. The InSight L100 can also be retrofitted to a wide range of CMM brands. 

MORE INFORMATION

ABOUT NIKON METROLOGY

Nikon Metrology offers the broadest range of metrology solutions for applications ranging from miniature electronics to the largest aircrafts. Nikon Metrology’s innovative measuring and precision instruments contribute to a high performance design-through-manufacturing process that allows manufacturers to deliver premium quality products in a shorter time. Further information is available on www.nikonmetrology.com.




Review Article Be the first to review this article


Featured Video
Jobs
GIS Manager for Union County NC at Monroe, California
GIS Spec I /Meteorological for University of Nebraska at lincoln, Nebraska
Geoscientist for University of Nebraska at lincoln, Nebraska
GIS Analyst for Town of Little Elm at Little Elm, Texas
GIS Analyst for Union County NC at Monroe, California
GIS Analyst for City of Carrollton at Carrollton, Texas
Upcoming Events
GEO Business at ExCel London United Kingdom - May 19 - 20, 2021
FOSSGIS-Konferenz 2021 at OST - Ostschweizer Fachhochschule Campus Rapperswil Oberseestrasse 10 Rapperswil Switzerland - Jun 6 - 9, 2021
GI_Forum 2021 | re.connecting spatially at Salzburg Austria - Jul 5 - 9, 2021
InterDrone 2021 at Hyatt Regency Dallas TX - Aug 10 - 12, 2021
University of Denver GIS Masters Degree Online



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise