TRINAMIC Offers New Dual-Axis Stepper Motor Controller-Driver System-on-Chip

Flagship Product Integrates many of TRINAMIC’s Patented Technologies

HAMBURG, Germany — (BUSINESS WIRE) — August 6, 2014 — TRINAMIC Motion Control, a leading global developer of motor and motion control technologies, today announced its flagship stepper motor controller-driver SoC. The new TMC5062 is a monolithic dual-axis motor controller and driver that incorporates eight of Trinamic's patented or patent-pending motion control technologies. This new SoC is the world's first device to integrate dcStep™, Trinamic's proprietary technology for automatically adapting motor velocity for sudden increases in load.

With its integrated motion control hardware, the TMC5062 can relieve any MCU with a SPI or single wire UART interface from all real-time motor calculations, including positioning and velocity ramp calculation. Trinamic's patented sixPoint™ ramp generator supports stepper motor calculation of high-resolution current values with up to 256 micro-steps per full-step. And its integrated power stage technology--for up to 1.5A peak current per motor--incorporates Trinamic's proven spreadCycle™ chopper unit for smooth commutation.

Trinamic's latest innovation, dcStep, addresses the need for stepper motors to maintain positional (or step) self-awareness without costly feedback circuitry. Without feedback circuits, significant operating margins must be implemented so that motor torque and velocity limits are not exceeded. Trinamic's new dcStep technology allows for momentary increases in torque to compensate for sudden increases in load resistance without losing step count, significantly reducing the safety margin that would otherwise be required by a stepper motor control system.

“Trinamic is focused on continual improvements in stepper motor system design,” explained Trinamic Founder and CEO Michael Randt. “Our new dcStep technology lowers system cost and energy consumption by shrinking excess safety margin, which reduces the motor size required for a specific application. This, in turn, leads to cooler operating temps, more compact board design, and the elimination of fans and heat sinks. A single technology like dcStep accelerates miniaturization, efficiency and ease-of use.“

Connected to a host microcontroller through an SPI or single wire interface, the TMC5062 executes all real-time position and velocity stepper motor calculations, and also directly drives coil currents for dual integrated stepper motor drives. This highly integrated dual-axis motion controller is ideal for pan and tilt control used in a wide variety of high volume applications: in millions of IP video cameras being deployed globally for security, border control and other remote viewing applications; in solar power heliostat mirror arrays, where tens of thousands to millions of mirrors reflect sunlight throughout the day to power a steam turbine for electricity generation; in medical and lab applications, like in-vitro analysis, that require X/Y motion control; and in 3D printers.

With a 1.5A peak current, the TMC5062 is ideal for use with stepper motors up to NEMA size 17, covering most of the typical hybrid stepper applications. The TMC5062 is software compatible with Trinamic's popular dual-axis TMC5031 motion control and driver IC, upgrading it's functionality with dcStep and an integrated ABN quadrature encoder interface. The new device implements a subset of relevant instructions for dual-axis operation and for six-point acceleration profiles.

Production Volumes of TMC5062-LA are available from August 2014.

The device is offered in a QFN48 (7mm x 7mm) package, priced at below USD 5 in 1,000 unit volumes.

To support rapid product development and prototyping, Trinamic offers a complete TMC5062 design kit with evaluation board and intuitive PC-based development software. The TMC5062 also comes with free reference source code, schematics and board layouts.


Based in Hamburg, Germany, privately-held Trinamic Motion Control GmbH & Co. KG is a recognized global leader in motor and motion control technologies. Leveraging its extensive portfolio of internally developed IP, Trinamic motion control products emphasize efficiency, quality and ease-of-use.

The company sells ICs, modules and integrated mechatronics to market leading manufacturers worldwide. The company's products have been integrated into a wide range of applications in biotechnology, lab automation, materials handling, CCTV and factory automation. More information about Trinamic can be obtained on the company website:

Printable graphics are available at:


Jonas P. Proeger, +49 (0) 40 514 806-40
TRINAMIC Marketing Director
Email Contact
Media Contact:
Public Relations for TRINAMIC
Spencer Horowitz, +1 408-832-9616

Review Article Be the first to review this article
Featured Video
Assistant Professor in Applied GIS for University of San Diego at San Diego, California
GIS Specialist for Schneider Geospatial at Indianapolis, Indiana
BIM/VDC Coordinator for MBH Architects at Alameda, California
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
Senior Highway Engineer for RS&H at Jacksonville, Florida
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Upcoming Events
HxGN LIVE GeoSummit 2021 at Virtual Event - Sep 21 - 23, 2021
INTERGEO 2021 at Hannover Germany - Sep 21 - 23, 2021
Automotive LIDAR 2021 at Online Only - Sep 21 - 23, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise