IXYS Introduces Three New Optimised Higher Current 1.8kV Thyristors

Current Ratings of 2600Amps to 3565Amps

LEIDEN, The Netherlands — (BUSINESS WIRE) — November 5, 2013 — IXYS Corporation (NASDAQ: IXYS) an international power and IC semiconductor company, today announced that its wholly owned UK subsidiary, IXYS UK Westcode Ltd., introduced three new 1.8kV pressure contact phase control thyristors with increased power density.

The new improved designs offer more than 40% increase in current rating over existing designs, while retaining the overall same package footprint. The improvement in performance is achieved by maximising the die size and an improved package design. The new silicon dice are bonded and encapsulated in fully hermetic ceramic packages with a novel design that have reduced thermal resistance, and the dice have enhanced electrical performance.

The new 2.2 inch (56mm) die device has an average current rating of 2600A and the package has a 2 inch (50mm) electrode contact diameter, with an industry standard overall diameter of 3 inches (74mm). The new 2.7 inch (69mm) die devices have average current ratings of 3175A to 3565A and the packages have a 2.6 inch (66mm) electrode contact diameter, with industry standard overall diameters of 4 inches (101.5mm).

“These three new device options fit in the mid-range current rating of IXYS’ product portfolio and have the highest ever power density offered in these footprints. The larger die sizes offer our customers the best performance and value for their money and continue the IXYS strategy to supply products with more power and less package. Higher currents in smaller packages allow our customers to also optimise their designs to use less material and so save on cost as well as reduce the impact on the environment,” commented Frank Wakeman, IXYS UK’s Marketing and Technical Support Manager.

The 2.2 inch (56mm) die device is available in an industry standard 1 inch (26mm) thick package and two voltage grades. Designations are: N2600MC160 (Vdrm/Vrrm 1600 Volts), N2600MC180 (Vdrm/Vrrm 1800). The 2.7 inch (69mm) die device is available in two industry standard package thicknesses, 1 inch (26mm) and 1.4 inch (35mm), plus two voltage grades. Designations are: 1 inch (26mm) thick package N3565HA160 (Vdrm/Vrrm 1600 Volts), N3565HA180 (Vdrm/Vrrm 1800) and 1.4 inch (35mm) thick package N3175HE160 (Vdrm/Vrrm 1600 Volts), N3175HE180 (Vdrm/Vrrm 1800).

Typical applications include soft starters, DC drives, and all controlled rectifier applications requiring devices in this power rating.

For data sheet please go to the IXYS UK website at www.ixysuk.com or please contact us at (email: sales@ixysuk.com) or telephone: +44 (0)1249 444524 for quotation.


Located in Chippenham, England, IXYS UK Westcode Ltd is the IXYS leading manufacturing site for very high power thyristors, SCRs and rectifiers ranging up to 6500 Volts and 15,000 Amps. IXYS UK continues to supply high technology components for a wide range of applications such as wind and solar energy, welding, AC and DC motor drives for oil, marine and water treatment facilities, uninterruptible power supplies, motor soft starters, transportation, induction heating, mining equipment and many other industrial applications.

About IXYS Corporation

Since its founding, IXYS Corporation has been developing power semiconductors and mixed signal ICs to improve power conversion efficiency, generate solar and wind power and provide efficient motor control for industrial applications. IXYS, and its subsidiary companies, offer a diversified product base that addresses worldwide needs for power control in the growing cleantech industries, renewable energy markets, telecommunications, medical devices, transportation applications, flexible displays and RF power.

Safe Harbor Statement

Any statements contained in this press release that are not statements of historical fact, including the performance, features and suitability of products for various applications, may be deemed to be forward-looking statements. There are a number of important factors that could cause the results of IXYS to differ materially from those indicated by these forward-looking statements, including, among others, risks detailed from time to time in the Company's SEC reports, including its Form 10-Q for the fiscal quarter ended June 30, 2013. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements.


IXYS UK Westcode Limited
Frank Wakeman, +44 (0)1249 444524
IXYS Long Beach
Ray Segall, 562-296-6584 (US sales enquiries only)

Review Article Be the first to review this article
Featured Video
Latest Blog Posts
The Open Geospatial Consortium BlogThe OGC Blog
by The Open Geospatial Consortium Blog
OGC seeks public comment on draft Simple Features 2021 standard
Geospatial Solutions Specialist for University of North Dakota at Grand Forks, North Dakota
GIS Analyst II for Foresters Co Op at Grass Valley, California
GIS Coordinator for City of Marysville at Marysville, Ohio
Electrical Designer for Dinter Engineering at Reno, Nevada
Senior Highway Engineer for RS&H at Jacksonville, Florida
BIM/CAD Specialist for Gordon Prill, Inc at Sunnyvale, California
Upcoming Events
InterDrone 2021 --- Cancelled at Hyatt Regency Dallas TX - Aug 10 - 12, 2021
URISA GIS Leadership Academy at 701 Lee St #960 Des Plaines IL - Aug 16 - 20, 2021
8th International Scientific Conference on SOCIAL SCIENCES (ISCSS) 2021 at Congress Centre MARITIM PARADISE BLUE Albena Bulgaria - Aug 21 - 30, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise