Xilinx Addresses System Integration with All Programmable SoCs at ARM TechCon 2012

SAN JOSE, Calif., Oct. 25, 2012 — (PRNewswire) — Xilinx, Inc. (NASDAQ: XLNX) today announced its participation at ARM® TechCon 2012, booth #515, October 30 - November 1, 2012. Xilinx will spotlight its All Programmable SoC hardware development platforms, IP and software solutions for ARM system developers and demonstrate how its solutions enable developers to reach new levels of programmable system integration, design productivity, security and performance. In-booth demonstrations and technical sessions will highlight the broad base of end applications and design solutions enabled by Zynq™-7000 All Programmable SoCs. Xilinx will also host a panel of experts on the pressing need for data security and design security across industries.

What: ARM TechCon 2012

Where: Santa Clara, CA, Santa Clara Convention Center, Booth #515

When: Conference & Exhibits – October 30-November 1, 2012


Thursday, November 1

12:00 p.m.12:45 p.m., Expo Floor

Critical System Design Challenges for a Secure World: Alternative Approaches and What Remains to be Done

Join experts from Xilinx, ARM and other industry leaders as they look at alternative hardware, software and combined hardware/software approaches to system challenges such as secure boot, data encryption, tamper and failure detection, key storage, support for multiple operating systems and software stacks. Key technologies discussed will include ARM TrustZone® technology, IP cores, hypervisors, and secure boot capabilities.


Tuesday, October 30

11:00 a.m.4:00 p.m., Ballroom 5

Accelerate Networking Application Development with the Xilinx ARM Cortex-A9 processor-based Mutli-core Zynq-7000 All Programmable SoC

Today's network applications are experiencing explosive traffic growth that demands fast and flexible convergence of compute & networking to secure the cloud infrastructure.  This session will explore the use cases of applying the Xilinx Zynq-7000 All Programmable SoC in wired networking applications, providing solutions much faster and more customizable than alternative SoCs.

Wednesday, October 31

11:30 a.m.12:20 p.m., Grand Ballroom E

Real-Time and Multi-core Processors – Helping Them Work Together

This session will examine architecture techniques for increasing real-time capability in multi-core systems including use of co-processors, asymmetric multiprocessing (AMP) and FPGA programmable logic. These techniques provide implementation options for solving signal conditioning problems and facilitate meeting real-time performance requirements more predictably. Specific use cases and examples will be provided.

Thursday, November 1

10:30 a.m.11:20 a.m., Ballroom G

A Case Study on Mapping Physical Simulation Algorithms to Heterogeneous Computing Platforms Utilizing Multi-core CPUs, Compute Accelerators and/or FPGAs

The speakers will discuss process and implementation strategies that enable the development of custom high-performance parallel computing solutions utilizing application specific hardware units in emerging architectures with multi-core CPUs, GPUs or FPGAs such as Xilinx's Zynq-7000 All Programmable SoC. Industry experts will present a practical algorithmic case study that serves to illustrate how an algorithm can be designed, partitioned and mapped to leverage the various computational elements of a heterogeneous architecture such as an All Programmable SoC.

1:30 p.m.2:20 p.m., Grand Ballroom E

Accelerating Multimedia Performance of Your ARM Processor with a Co-processor

Discussion topics for this session will include different methods for attaching accelerators to processors such as the ARM Cortex™-A9 and the tradeoffs for each use case. The latter portion of the session will explore the implementation of a real-world processing problem and how software tasks were accelerated with programmable logic accelerators tightly coupled to an ARM dual-core Cortex-A9 processing system.

2:30 p.m.3:20 p.m., Grand Ballroom B

Low-Power and Multi-core Processing: Optimizing Performance and Power with Programmable Systems

This session examines the integration of ARM processors, power domains, clock management, and co-processing offloading into FPGAs, which enables dramatic reduction in system power for high-performance applications. These techniques yield an order-of-magnitude less power, as computational tasks requiring tens or hundreds of watts with a general-purpose processor can be managed via an ARM Cortex-A9 processor system integrated with programmable logic.

3:30 p.m.4:20 p.m., Ballroom G

Algorithmic Acceleration of Processing Systems Using High-Level Synthesis

This paper discusses how system designers can rapidly build efficient, high-performance, customizable single-chip processing systems using Xilinx's latest All Programmable SoC technology.  

Exhibition Demos

Tuesday – Thursday, October 30 - November 1

  • Image Processing –Co-processing acceleration using Zynq-7000 All Programmable SoCs on iVeia's Breckenridge Platform.
  • Driver Assistance Solution – Zynq-7000 All Programmable SoC-based scalable, single-chip platform for driver assistance applications. Demonstration will showcase blind spot detection using Optical Flow.
  • SYSGO Hypervisor – Three operating systems concurrently executing on the two processor cores of the Zynq-7000 All Programmable SoC. The application will visually show different scenarios: stopping and resuming some partitions, changing scheduling policy and showing impact on real-time behavior.
  • Object Recognition and Tracking – Demonstration showing how Zynq-7000 All Programmable SoCs can be used in real-time applications with critical loop processing being handled in programmable logic.

About ARM TechCon 
ARM TechCon is the most comprehensive annual event for hardware and software engineers. Attendees have the opportunity to learn, connect and collaborate with some of the greatest ARM design experts in the industry.

About Xilinx
Xilinx is the world's leading provider of All Programmable FPGAs, SoCs and 3D ICs. These industry-leading devices are coupled with a next-generation design environment and IP to serve a broad range of customer needs, from programmable logic to programmable systems integration. For more information, visit www.xilinx.com.


Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Zynq, and other designated brands included herein are trademarks of Xilinx in the United States and other countries. ARM, Cortex, and TrustZone are trademarks of ARM in the EU and other countries. All other trademarks are the property of their respective owners.

Bruce Fienberg
Email Contact

SOURCE Xilinx, Inc.

Xilinx, Inc.
TechCon 2012
Web: http://www.xilinx.com

Review Article Be the first to review this article

Latest Blog Posts
Jim SparksGISCafe Guest
by Jim Sparks
Maps are (Still) Important Again
Applications Programmer Analyst II for Southern Nevada Health District at Las Vegas, Nevada
Applications Programmer Analyst I for Southern Nevada Health District at Las Vegas, Nevada
Geographical Information Systems Analyst for Saalex Solutions at Fallon, Nevada
Upcoming Events
Geo Week, July 27-29-2020 (NEW DATE), at McCormick Place | , IL Chicago IL - Jul 27 - 29, 2020
SPAR 3D & AEC Next Technology Expo + Conference(NEW DATE) at McCormick Place Chicago IL - Jul 27 - 29, 2020
Smart GEO Expo 2020 at COEX Hall C Republic of Korea Seoul Korea (South) - Aug 19 - 21, 2020
IWCE 2020 Conference at Las Vegas Convention Center LAS VEGAS NV - Aug 24 - 28, 2020
University of Denver GIS Masters Degree Online
UAV Expo2020 -Register   & save


© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise